Design and principle of operation The fully automatic climate control works in the same way as the one on the Audi A4. It has only been adapted to the center console of the Audi A2. Sensors...
Climate control module The climate control system is a modular system. By adding or replacing units, the basic version can be converted to other options: with semi-automatic or...
Fresh air/recirculation dampers The supply air/recirculation dampers are electrically adjustable. Using a lever mechanism, both dampers are set to a position specified by the driver. Pregnant...
Air conditioning compressor — design description New compressor concept: single-acting swashplate compressor with 6 pistons; has a variable working volume, which allows you to set the required cooling...
A/C Compressor Pulley The pulley consists of the pulley itself and the driven disk. The pulley and the disc are tightly connected to each other by 1 rubber element. A rubber element...
Additional heater RTS Z35 For vehicles with diesel engines in some country versions, the heating is enhanced by an electric auxiliary heater. When a high-efficiency economical engine is...
Liquid auxiliary heater This auxiliary heater is predominantly installed on the Audi A2 with TDI engine in certain country versions. It serves for fast warming up; engine cooling...
Operation of the auxiliary heater 1. Coolant heating circuit Coolant for heating enters through the inlet pipe. It passes through the heat exchanger and, after heating, is fed through the...
Scheme of the auxiliary heater system The following parameters are used in the system regulation: temperature at the deflectors (air conditioner sensors); temperature at the evaporator deflector;...