![](https://www.audimanual.ru/img/q/3974.jpg)
Washer reservoir, washer hose, nozzle 1. Bumper; 2. Water hose for the nozzle on the right. Secured with a binder on the bumper; 3. Right nozzle; 4. Right mount for nozzle and headlight; 5. Washer reservoir; 6. Headlight cleaner pump - V11 -; 7. Sealing sleeve. If damaged, replace; 8. Water hose from headlight washer pump -V11-; 9. Left mount for injector and headlight; 10. Water hose to the nozzles; 11. Left nozzle
Removing headlight cleaning system nozzles
Turn off the ignition. Remove the corresponding front wheel arch liner. Place a collection container under the nozzle. Remove the hose -4- by pulling out the locking clip -5-. Unlock the spring latches -2- and -3- on the injector upwards and at the same time remove the injector -1 - from the mounting.
![](https://www.audimanual.ru/img/q/3975.jpg)
Installation
Installation in reverse order: spring clips -2- and -3- of injector -1- must engage clearly. Install the front fender liner.
Setting up injectors
The headlight cleaner nozzles are already factory adjusted and do not require adjustment after installation.
Removing the windshield washer reservoir
The common windshield washer and headlight cleaner reservoir is located at the rear in the left front wheel arch.
Removing headlight cleaner pump -V11-
Turn off the ignition. Remove the windshield washer reservoir, but remove it only enough so that the headlight cleaner pump -V11- -pos. 2-. Place the receiving reservoir under the washer fluid reservoir. Disconnect email plug connection -1-. Remove the washer hose -3- from the headlight washer pump.
![](https://www.audimanual.ru/img/q/3976.jpg)
Lift up the headlight cleaner pump from the windshield washer reservoir.
Installation
Installation in reverse order: secure all hose connections with hose clamps of the appropriate series. Check seal. bushing for damage. Installing the windshield washer reservoir.
Visitor comments