Note. When making repairs, it is essential to install the repair kit completely. On the brake. Apply a thin layer of mounting paste -G 052 150 A2- to the cylinder, piston and seals.
![](https://www.audimanual.ru/img/q/2854.jpg)
Rear brake caliper, electric parking and hand brake (ERV) 1. Self-locking bolt. 35 Nm. As a rule, it must be replaced. When unscrewing or tightening, hold the guide bolt; 2. Brake housing calipers with an executive body; 3. Bleeding fitting; 10 Nm; 4. Protective cap. Place on the bleeder fitting; 5. Lip seal; 6. Clamping nut. To apply the parking brake; 7. Piston; 8. Guide fingers. Lubricate before installing the protective cap. Supplied as a spare part with sufficient lubricant; 9. Protective cap. Place the brake bracket and guide pin on it; 10. Brake bracket with guide pins and protective cap. Supplied assembled with plenty of grease on the guide bolts. If the protective caps or guide pins are damaged, install a repair kit. When installing the guides, use the supplied tube of lubricant; 11. Protective cap. Place the outer working edge onto the piston
Visitor comments