General information and precautions The fuel system includes the fuel tank, fuel lines, fuel filter, fuel pump. The fuel pump assembly with fuel gauge sensor is located in the fuel tank. The fuel...
Fuel tank — design description 2.0. Fuel tank: 1 - bolt. Tightening torque - 23 Nm 2 - nut for fastening the heat shield 3 - bracket 4 - fuel return line 5 - fuel supply line 6 - plastic...
Fuel tank — removal and installation Withdrawal Attention! Since the fuel tank does not have a hole for draining the fuel, it is advisable to remove the tank after running out of fuel. 1. Remove...
Fuel filler neck — design description 3.0. Fuel filler neck with surge tank: 1 - nut. Tightening torque - 2 Nm 2 - heat shield of the fuel tank filler neck 3 - connecting hose 4 - heat shield of...
Fuel filler neck — removal and installation Withdrawal 1. Remove all available fuel from the tank if it has not been used up. In workshops, a special device for pumping fuel VAS 5190 is used for this...
Fuel pump / fuel pump — removal and installation Attention! The procedure is given on the example of vehicles with a diesel engine. Withdrawal 1. Remove all available fuel from the tank if it has not been...
Jet pump — design description 5.0. Jet pump: 1 - fuel line 2 - left section of the fuel tank with a jet pump 3 - tee 4 - fuel gauge sensor plug 5 - fuel gauge sensor 6 - clamp 7 - ring nut....
Jet pump — removal and installation Withdrawal 1. Remove all available fuel from the tank if it has not been used up. In workshops, a special device for pumping fuel VAS 5190 is used for this (...
Fuel filter — removal and installation Attention! The procedure is given on the example of vehicles with a 6-cylinder engine. Withdrawal 1. Remove cotter pin 4 (see illustration). 6.1. Remove cotter...