Engine Cooling System — Design Description The coolant constantly circulates in the circuit, pumped by the water pump. While the engine is not warmed up, the coolant circulates only in the cylinder...
Coolant — draining and refilling The coolant should only be changed after a repair of the cooling system, for which the coolant had to be drained. The coolant is not replaced as part of...
Water pump — design description 3.0. Water pump. Cars with petrol engine: 1 - water pump housing 2 - bolt. Tightening torque - 10 Nm 3 - coolant supply pipeline 4 - sealing ring. To be...
Water pump — removal and installation Withdrawal Cars with a gasoline engine 1. Set the front cross member to the service position. 2. Disconnect the coolant supply hose from the fitting on the...
Thermostat — removal, installation and inspection Withdrawal Cars with a gasoline engine 1. Drain the coolant (see relevant chapter). 2. Disconnect the coolant hoses from the thermostat housing. 3. Unscrew the...
Radiator — removal and installation Withdrawal Cars with a gasoline engine 1. Remove the cap from the coolant expansion tank. Attention! With a hot engine, place a rag on top of the expansion...
Additional radiator — removal and installation Attention! Additional radiators are equipped with cars with a gasoline engine. Withdrawal 1. Remove the cap from the coolant expansion tank. Attention! With a...
Radiator blower fan — removal and installation Withdrawal Cars with a gasoline engine Attention! Cars with a gasoline engine are equipped with two radiator fans. Left radiator fan 1. Disconnect the plug...
Heating and air conditioning — general information The air supplied to the passenger compartment is sucked in from the outside through the fairing grille. Outside air passes through the dust filter (cabin...