Exterior (external elements) of the car Audi A6 C4

The exterior elements of the Audi A6 car body include front and rear bumpers, hood, trunk, doors, windows, moldings, exterior rear-view mirrors, etc. Here are the instructions for removing/installing body exterior components.

Tightening torques for threaded connections, N·m
Hood: - hinge fixing bolts 21 - pivot bolt 15 - lock nut locking pin 10 - mounting bolts 21 trunk lid: – bolts of fastening of loops to a body 21 - fixing nuts...

Body maintenance and repair
The condition of your car's body is very important because it has a large impact on its resale value. It is much more difficult to repair a run down or damaged...

Front bumper
Withdrawal Audi 100 models 1. Remove the grille and fog lights. 2. Unscrew the bumper mounting bolts, release the latches and remove the bumper. Audi A6 models...

Rear bumper
Withdrawal Models with body type "sedan" Loosen the mounting bolts and remove the bumper. Models with body type "station wagon" 1. Loosen the fixing screws...

Removal and installation of a cowl
Withdrawal 1. Remove the washer hose. 2. On models with heated sprinklers, disconnect the connectors and remove the wires from the hood. 3. Mark the...

Hood opening cable
Withdrawal 1. Remove the fasteners and release the cable bushings. 2. Disconnect the cable from the lock. Remove the hood opening handle, unscrew the fixing...

Hood lock
Withdrawal 1. Disconnect the lock release cable. 2. Mark the installation position of the lock fixing bolts. Unscrew the fixing bolts, disconnect the hook of...

Removal and installation of doors
Withdrawal 1. Slide the cover aside and disconnect the connection connector. 2. If there is no connector, remove the door frame and remove the wires/hoses from...

Glass and power window
Withdrawal 1. Remove the door frame. 2. Remove the power window handle. 3. Mark the position of the outer washer on the glass mount, remove the retaining clip...

Trunk lid
Withdrawal 1. Remove the interior trim panel. 2. Disconnect the connectors. On models with central locking, disconnect the vacuum tube. 3. Detach the support...

Trunk lid lock elements
Withdrawal 1. Loosen the fixing screws and remove the inner trim panel. Lock 2. Disconnect the rods and the connection connector from the lock. 3. Unscrew the...

Backdoor
Withdrawal 1. Remove the top trim panel (arrows show mounting clips). 2. Remove the side trim panels. 3. Remove the fixing screws on the sides and top of the...

Elements of the central lock
Withdrawal Central locking pump 1. Remove the rear seat cushion. 2. Remove the insulator and remove the pump. 3. Disconnect the connector and vacuum hose and...

Elements of electric windows
Switches See subsection 13.1.5 . Power window motors Withdrawal 1. Remove the door trim panel. 2. Disconnect the connection connector, unscrew the fixing...

Rear-view mirrors and related items
Rear-view mirror with mechanical adjustment 1. Remove the door trim panel. 2. Loosen the fixing screws and remove the mirror. 3. Installation is carried out in...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share information:

A6(C5-AR, 1999-2005)

A6(C5, 1997-2004)

A6(C4, 1994-1997)