Brake system — general information The brake system consists of the main brake cylinder, brake booster and disc brakes of the front and rear wheels. The hydraulic braking system has two circuits...
Brake Specifications Warning: Separate characteristics are also given in the text of the Chapter and, if they are mandatory, are highlighted in bold. Common parameters...
Removal of air from the brake system After the repair of the brake system, during which it was opened, air may enter the system. In this case, the air must be removed from the system. A sign of...
Removal and installation of front brake pads With the help of illustrations, find out the execution of the caliper installed on your car. Front brakes FN3 1 - Brake disc cover 2 - Screw, 10nm 3 - Brake...
Checking the thickness of the brake disc 1. Mark the direction of rotation of the wheel with an arrow. Loosen the wheel bolts. Raise and place the car on stands. 2. Measure the brake disc thickness at...
Parking brake adjustment Caution: Due to the automatic self-adjustment of the parking brake, it is usually not necessary to adjust it. Parking brake adjustment is only required if the...
Removal and installation of the brake light switch The brake light switch is located in the pedal support. When the brake pedal is pressed by means of the switch, the brake light comes on. In addition, the...
Removal and installation of a brake hose Caution: Observe the rules for handling brake fluid described in Section Brake Fluid Replacement . The pipelines of the brake system communicate the master...