Front suspension device Front suspension elements 1 cap 2 Top cover 3 Bearing support 4 plate 5 Top ring 6 Bearing 7 Case 8 Buffer 9 Shock absorber 10 Spring 11 Suspension strut 12...
Checking the shock absorber of the front suspension Usually the shock absorber does not fail abruptly, its action weakens gradually, which can be immediately overlooked. There is a hard and fast rule: after two...
Replacing the front shock absorber The shock absorber can be replaced without removing the spring or the entire suspension strut. This would be quite simple if it were not required to use a...
Removing the front suspension strut If the suspension strut is to be removed completely, then during this work it is necessary to press the drive shaft out of the wheel hub, which, as a rule,...
Removal and installation of the rear axle Front wheel drive models Withdrawal Raise and support the vehicle securely. Remove wheel. Disconnect muffler suspension bands. Lower and support the muffler...
Removing the rear suspension strut Remove wheel. Raise and support the vehicle securely. Raise the wheel suspension slightly with a jack so that the wheel suspension is not fully under spring...
Removing the rear shock absorber In order to separate the shock absorber from the spring on the removed shock absorber, the spring must be fixed with two, and preferably three, compressors....
Removing and installing rear suspension arms Quattro On these vehicles, the suspension arm is called a trapezoid arm. It is connected to the wheel bearing housing and to two separate cross beams. Always...
Rear wheel bearing replacement 1 Rear axle trunnion 2 Shield (with rear disc brakes) 3 Oil seal 4 Inner wheel bearing 5 inner bearing ring 6 Rotor (only for vehicles with ABS) 7 Wheel hub...